PORSCHE 914 ENGINE MOUNTING HARDWARE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Stoptech big brake kit front slotted red caliper Porsche 997 turbo 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optim...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,882.60
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 997 GT3 rs 2007
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that op...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$3,882.60
Make a selection
Agency powers exhaust system for the 997.2 features high quality and tuned mufflers in addition to the high flow xpipe in the kit. The exhaust has been tuned to produce an incredible race tone without a lot of drone found in similar designs. The exhaust fits with the agency power dual exhaust tips or stock tips as pictured. Since this retains the primary catalytic converters, t here are no check engine light or emissions issues.
The entire exhaust is 304 stainless steel and polished to a show finish. It uses the OEM mounting points and hardware.
General Fitment 911 2009-12
$1,349.95
Make a selection
Stoptech big brake kit front slotted black caliper Porsche 996 Carrera 4 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$3,126.60
Make a selection
Kit includes
-new compressor with clutch, compatible with r134a and r12
-ester refrigerant oil, compatible with r134a or r12
-r134a charge port adapters.
-kuehl kwick mounting bracket & hardware
-new compressor to rear deck lid condenser barrier hose line assembly with sae approved crimped fittings and our high-low pressure switch feature. The condenser side fitting of the hose assembly will be flare.
-new compressor to evaporator barrier short hose; with sae crimped fitting on the compressor side. This allows you to cut & splice to old suction line in the engine compartment using a barb fitting with clamps supplied in the kit.
-new receiver drier, Porsche configuration.
-detailed installation instruc...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1978-83 930 1975-77 911 1974-77 911 1970-73
Stoptech big brake kit front slotted red caliper Porsche 997 GT2 2008
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optimal...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 GT3 2007-11
$3,882.60
Make a selection
Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (23 kg)
- 44.5 lb (19 kg) savings over stock system!
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary on 997.2 GT3
The FVD GT3 race exhaust gives the 997 GT3 a more pronounced, aggre...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $6,698.73
Make a selection
Stoptech big brake kit rear slotted black caliper Porsche 996 GT2 2004
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that optima...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 GT3 2003-05
$3,126.60
Make a selection
Brombacher race exhaust system with valves for 997 GT3/rs with 2 x 90mm tips
Facts:
- + 25 crank hp & + 18 crank torque with valves closed
- 200 cell high flow, tri metal German hjs ?hd? Sport catalysts**
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 37.2 lbs. (16.9 kg) this is the lightest valved system in the Brombacherline !**
- 49.3 lb (22.3 kg) saving?s over stock system!**
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- made in Germany
- 110 db with valves open (not for faint of heart!)
- 103 db with valves closed
- intox...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,702.68
Make a selection
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Stoptech big brake kit front drilled red caliper Porsche 996 Carrera s 2005
first, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel .the key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why stoptech developed the balanced brake upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.every stoptech balanced big brake kit is engineered to produce that o...(choose a part on the right to read more)
General Fitment 911 2005-08
$3,666.60
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
Rennline billet aluminum solid engine mount Porsche 997 05+
Solid engine mounts are a smart upgrade to any track or aggressive street car, and are installed on Porsche factory race cars. Stock mounts are made of compliant rubber, and contribute to imprecise shifting and inferior throttle response. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the cars unibody, creating a crisper throttle response and shifter feel. Billet engine mounts will give your vehicle a more solid, predictable feel on the track. Rennlines solid mounts are cnc machined from 6061 aluminum for strength and light weight, and come as a pair with new ...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
From $306.90
Make a selection
Sold as a set of (2)
Upgrade your soft rubber engine mounts with our solid engine mounts.
- precise shifting
- better throttle response
- cnc machined aluminum
- sold as a pair with all mounting hardware
- more responsive chassis
- made in Germany
Note:
You feel more vibration and hear more noise with solid mounts.
Fits: GT2 (96-98), turbo (95-98), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
From $418.70
Make a selection
Brembo direct replacement 2-piece rotors for the '04-'06 Porsche Carrera GT designed to be used with the vehicles OEM brake calipers. These include brembo's high thermal type iii rotors , billet aluminum bells, and anti-rattle floating hardware. The floating disc mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$2,832.54
Make a selection
Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torque bolts. Another great feature of these hooks are that rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Rennline's rear tie-down brackets are available in 66° to allow you to install these brackets in ma...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
Solid engine and transmission mounts are a smart upgrade to any track or aggressive street car, and were installed on Porsche factory race cars. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the car’s unibody, creating a crisper throttle response and shifter feel. Rennline’s solid mounts are cnc machined from 6061 aluminum for the ultimate in strength and light weight, and come with new grade 8 mounting hardware.
General Fitment 911 1974-77 930 1975-77 911 1984-86 911 1978-83 911 1965-69 911 1970-73
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|